|
|
Height Safety
Australian Standards
To comply with AS/NZS 1891.4.2000 Clause 9.3.1, all items of height safety equipment in regular use should be periodically inspected as below or more frequently if recommended by the manufacturer. The inspection and servicing is required to be carried out by a competent person.
- 3 monthly - Fall arrest devices - external inspection only
- 6 monthly - Belts, harnesses, lanyard assemblies and associated equipment
- 12 monthly - Permanently installed anchorages, Fall arrest devices - inspection and full service, Horizontal and vertical life lines
A competent person is defined as someone who has either been trained or has enough experience in using the equipment in such that they can recognise any faults or defects in that equipment. Finding defects in anchorages and horizontal lifelines are more complicated than harnesses and lanyards. Inspection of these items in particular should be referred to someone with sufficient engineering background.
NQ Fasteners & Lifting Height Safety Team can assist you with:
- Auditing Risk and Compliance Assessments
- Supply, Installation, Training and Certification
- Horizontal Safety Lines and Horizontal Rigid Rails
- Anchor Points - temporary and permanent mount
- Permanent Ladder Access Systems and Safety Lines
- Portable Ladder Brackets - permanent mount and portable
- Walkways and Handrails
- Safety Nets
- Belts, Harnesses, Lanyards and Fall Arresters
Products by Safety Anchors
 |
Safety Anchor
The dual bending motions of our new, innovative "Safety Anchor" eyebolt (patent pending) enables it to
use up superior amounts of energy, thereby reducing the forces exerted to the attachment point on the
structure. Comprehensive testing has proved up to 88 percent energy absorption.
The "Safety Anchor" integrated systems approach is supported by a family of products, tailored to the
specific requirements of individual site applications.
All anchors comply with the requirements of AS/NZS 1891.4 clause 9.3.3 and is in accordance with the current code(s) of practice(s) for working at heights.
|
Expand All | Contract All
LB801 LADDER BRACKET
 |
Ladder Bracket is a permanent fitting, designed to support a ladder, stopping sideways movement.
Also has a securing point to tie off ladder and thus provide a safe access point. |
PLB802 PORTABLE LADDER BRACKET
Portable Ladder Bracket fits directly to the ladder and is constructed from lightweight aluminium.
Designed to be a mobile solution for ladder safety.
TA303 TEMPORARY ANCHOR
Temporary Anchor is a temporary anchor for use on metal profile roofs.
Affords multidirectional fall arrest protection for workers.
Can also be used for Temporary Staticlines.
Can be customised for A/C and Supersix roofs.
Tested to AS/NZ1891.4
Expand All | Contract All
Expand All | Contract All
|
|
|
|
This product is unequalled when there is little or no access to the underside of roof, when fixing to metal roof/steel purlin structures and prevents the user from losing control of the product and allowing it to become a falling object.
Concrete Fix Anchor is used when anchors are required to be chemically fastened into concrete.
